Kako bi saznali više, uključujući kako kontrolirati kolačiće, pročitajte ovdje: Politika kolačića
Explore beautiful gloss effect
PLA Glitter is a highly aesthetical material blended with high-glitter particles. The particle content in the filament increases the hardness and compression resistance of printed items. These properties are improved at the cost of the higher brittleness of items. There is a possibility to control the gloss level by increasing/decreasing the wall thickness.
Tip: Due to the content of infusible particles, it is necessary to use printing nozzles with diameters of 0.4mm or more.
- not abrasive
- improved hardness and compression resistance as compared to PLA without admixtures
- user friendly
- high-gloss surfaces, which reduces the visibility of layers on the side face of the printed items
- easy to print
- no shrinkage after cooling
- interior design articles
- advertising materials
- educational projects
- any areas where it is essential to present specific geometric figures in an eye-catching manner
Filament diameter: 1.75mm ± 0.05mm / 2.85mm ± 0.05mm
Density: 1.24 g/cm3
Nozzle temperature: 185-215°C
Bed temperature: 0-45°C
Printing speed: 40-110mm/s
Verify your spool option: YES
Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.